Takaisin

Tyre repair tools

Tuotteet

Rajaa tuotteita
Brändi

#170 – 600-0100 buffing wheel, 32×18 !TIPTOPOL! (available)

Lue lisää
The K170 buffing wheel with a diameter of Ø 32 mm and a 3/8″ thread is designed for roughening the
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

#170 – 600-0100 buffing wheel, 44×19 !TIPTOPOL! (not_available)

Lue lisää
The K170 buffing wheel with a diameter of Ø 44 mm and a 3/8″ thread is designed for roughening the
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

10 mm Hartmetal cutter for HM-ECO drill for steel cord !TIPTOPOL! (available)

Lue lisää
For calibrating the hole in punctured tyres.
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

12 mm cutter HM-ECO drill !TIPTOPOL! (available)

Lue lisää
For calibrating the hole in punctured tyres repaired with Minicombi or Remastem inserts.
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

4.5 mm Hartmetal cutter for HM-ECO drill for steel cord !TIPTOPOL! (available)

Lue lisää
The HM-ECO Ø 4.5 reamer tool is used to calibrate the hole in punctured types. For use on the outside
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

8 mm Hartmetal cutter for HM-ECO drill for steel cord !TIPTOPOL! (available)

Lue lisää
For calibrating the hole in punctured tyres
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Bearing roller, 12 mm !TIPTOPOL! (available)

Lue lisää
The 12 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Bearing roller, 4mm !TIPTOPOL! (available)

Lue lisää
The 4 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Branding iron for marking tyres – 1”, 1000W !TIPTOPOL! (not_available)

Lue lisää
For permanent and frequent tire marking, numbers from 0 to 9, 25 mm high, possibility to order an individual plate
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Branding iron, 1 line – for rubber marking !TIPTOPOL! (available)

Lue lisää
For branding of tyres. 
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Brass brush !TIPTOPOL! (available)

Lue lisää
The brass brush is designed for cleaning mechanically roughened surfaces from the finest particles of rubber abrasion. It is designed
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Buffing ball 40×6 – pumice stone !TIPTOPOL! (not_available)

Lue lisää
The Pumice stone is designed for machining rubber on the inside of passenger car and lorry tyres.
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Buffing ball, 20 !TIPTOPOL! (available)

Lue lisää
The Ø 20 mm stone is suitable for machining steel cord during tyre repair. It has a specially profiled ball-shaped
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Buffing ball, 50×25 !TIPTOPOL! (available)

Lue lisää
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8 thread is designed for roughening the
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Buffing ball, 50×25 – 16 !TIPTOPOL! (available)

Lue lisää
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8″ thread is designed for roughening the
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Brändi

Buffing stone, 14×45 mm !TIPTOPOL! (available)

Lue lisää
The Ø 14 x 45 mm stone is suitable for machining steel cord during tyre repair. The Ø 14 x
  • Pointti
  • Pointti
  • Poitti
  • Pointti
Lataa lisää